RSS

Stratos2 Demo Setup Alpha – with Open Stack

04 Jan

This blog post is going to explain how to setup the Stratos2 Demo Setup in VirtualBox

first you have to download our image from here (This will take some time because of the size 17.3GB)
Now double click on it to install.
Once you done with the installation you have to go to configure the “virtual host only interface” with following details
1. go to file->preferences in VirtualBox
2. Select Network tab and add new “Host only network
vb1

IPV4 address: 172.14.0.254
IPV4 network mask :255.255.0.0
vb2

3. Now start this image and login to the Instance

username: wso2
password: g

vm

vm1

v3

4. Go to /demo_setup/conf/ and view setup.conf

v4

If you have any changes in configuration according to your environment you can do it in setup.conf

5. Move to demo_setup folder and type “sudo bash” to move to root and run the setup-demo.sh
Press enter when the following questions are coming

================================================================================

Enter new UNIX password:
Retype new UNIX password:
No password supplied
Enter new UNIX password:
Retype new UNIX password:
No password supplied
Enter new UNIX password:
Retype new UNIX password:
No password supplied
passwd: Authentication token manipulation error
passwd: password unchanged
Try again? [y/N] N

Changing the user information for git
Enter the new value, or press ENTER for the default
Full Name []:
Room Number []:
Work Phone []:
Home Phone []:
Other []:
Is the information correct? [Y/n] Y
do ssh-keygen without password for git user. press enter to continue...

Generating public/private rsa key pair.
Enter file in which to save the key (/home/git/.ssh/id_rsa):
Created directory '/home/git/.ssh'.
Enter passphrase (empty for no passphrase):
Enter same passphrase again:
Your identification has been saved in /home/git/.ssh/id_rsa.
Your public key has been saved in /home/git/.ssh/id_rsa.pub.
The key fingerprint is:
83:55:ac:2b:ae:6d:4a:58:98:b9:11:46:2a:7d:cf:f5 git@s2demo
The key's randomart image is:
+--[ RSA 2048]----+
| . .. |
| + .. |
|o + . o. |
|.. * o +.. |
| = . + S.E |
| = . .. |
| o .. . |
| . .o |
| o+. |
+-----------------+
Reading package lists... Done
Building dependency tree
Reading state information... Done
git is already the newest version.
gitolite is already the newest version.
gitweb is already the newest version.
apache2 is already the newest version.
bind9 is already the newest version.
apache2-suexec is already the newest version.
0 upgraded, 0 newly installed, 0 to remove and 56 not upgraded.
Adding entries to gitolite... Please do :wq after gitolite.rc file open. Press enter to continue...

The default settings in the rc file (/home/git/.gitolite.rc) are fine for most
people but if you wish to make any changes, you can do so now.

hit enter...

================================================================================

Once you reached here, it will open the file with details then you have to save the file by doing the “:wq” command
vm5

Again you can see the following commands in console – just press enter to proceed
================================================================================

creating gitolite-admin...
Initialized empty Git repository in /home/git/repositories/gitolite-admin.git/
creating testing...
Initialized empty Git repository in /home/git/repositories/testing.git/
[master (root-commit) 390bc9e] start
2 files changed, 6 insertions(+)
create mode 100644 conf/gitolite.conf
create mode 100644 keydir/git.pub
Cloning into 'gitolite-admin'...
Warning: Permanently added 'localhost' (ECDSA) to the list of known hosts.
remote: Counting objects: 6, done.
remote: Compressing objects: 100% (4/4), done.
Receiving objects: 100% (6/6), 709 bytes, done.
remote: Total 6 (delta 0), reused 0 (delta 0)
do ssh-keygen without password for wso2 user. press enter to continue...
Generating public/private rsa key pair.
Enter file in which to save the key (/home/wso2/.ssh/id_rsa):
/home/wso2/.ssh/id_rsa already exists.
Overwrite (y/n)? y

Enter passphrase (empty for no passphrase):
Enter same passphrase again:
Your identification has been saved in /home/wso2/.ssh/id_rsa.
Your public key has been saved in /home/wso2/.ssh/id_rsa.pub.
The key fingerprint is:
03:80:76:55:c0:ea:9f:04:3c:e9:38:d8:bd:9e:09:11 wso2@s2demo
The key's randomart image is:
+--[ RSA 2048]----+
| ..ooo. |
| o ... |
| .Eo o. |
| .* . |
| o.= o S |
|. +.+ . . |
| .. + . |
| ..oo |
| .+ |
+-----------------+
[master a6087aa] Check in by git
3 files changed, 10 insertions(+), 4 deletions(-)
create mode 100644 conf/repos/testing.conf
create mode 100644 keydir/wso2.pub
Already up-to-date.
Counting objects: 12, done.
Compressing objects: 100% (7/7), done.
Writing objects: 100% (8/8), 927 bytes, done.
Total 8 (delta 0), reused 0 (delta 0)
remote: creating testingt...
remote: Initialized empty Git repository in /home/git/repositories/testingt.git/
To git@localhost:gitolite-admin
390bc9e..a6087aa master -> master
Cloning into 'gitolite-admin'...
remote: Counting objects: 14, done.
remote: Compressing objects: 100% (11/11), done.
Receiving objects: 100% (14/14), 1.57 KiB, done.
remote: Total 14 (delta 0), reused 0 (delta 0)
ln: failed to create symbolic link `/etc/apache2/mods-enabled/appfactory.load': File exists
-D AP_DOC_ROOT="/var/www"
-D AP_GID_MIN=100
-D AP_HTTPD_USER="www-data"
-D AP_LOG_EXEC="/var/log/apache2/suexec.log"
-D AP_SAFE_PATH="/usr/local/bin:/usr/bin:/bin"
-D AP_UID_MIN=100
-D AP_USERDIR_SUFFIX="public_html"
ln: failed to create symbolic link `/etc/apache2/mods-enabled/suexec.load': File exists
ln: failed to create symbolic link `/etc/apache2/sites-enabled/git': File exists
apache2: Could not reliably determine the server's fully qualified domain name, using 127.0.1.1 for ServerName
httpd (no pid file) not running
apache2: Could not reliably determine the server's fully qualified domain name, using 127.0.1.1 for ServerName
/opt/ADC ~/demo_setup
~/demo_setup
/opt/cloud_controller ~/demo_setup
In repository/conf/carbon.xml
rm: cannot remove `./repository/conf/service-topology.conf': No such file or directory
rm: cannot remove `./repository/conf/service-topology.conf.back': No such file or directory
~/demo_setup
/opt/wso2mb-2.0.1 ~/demo_setup
~/demo_setup
/opt/elb ~/demo_setup
~/demo_setup
/opt/agent ~/demo_setup
~/demo_setup
/opt/wso2is-4.0.0 ~/demo_setup
~/demo_setup

Import the wso2.pub into openstack (With the same name mentioned in /opt/cloud_controller/repository/deployment/server/cartridges/)
cat /home/wso2/wso2.pub.
Cut and paste the output into the box that you get when execute import keys of the openstack dashboard
When you are ready press any key to continue starting servers

================================================================================
once you come here in the command line you have to take another console and login to the VM as follows

ssh wso2@172.14.0.1
password : g

op7

then follow this command to view the public key
cat /home/wso2/wso2.pub and copy the public key
vm6

Then open the OpenStack buy using the IP address http://172.14.0.1/
op

username : admin
password : openstack

op1

Go to Project -> Access and Security then go to section Key Pairs 
op4

Delete the already exist “stratos-demo” key and import it again
op5

once you finish this again you can go to earlier command line and press enter to start servers
op6

when it finished you can see the command line as follows
op8

Now the stratos demo environment ready for use

6. Go to https://172.14.0.1:9445/carbon/admin/login.jsp

username : admin
password : admin

as

Create new tenant with following details

Domain : stratos.com
FirstName : statos2
LastName : alpha
Admin Username : dinuka
Password : dinuka123
Email : dinukam@wso2.com
as1

Now we are done with the Stratos2 Demo Setup

About these ads
 
2 Comments

Posted by on January 4, 2013 in Other, Stratos, wso2

 

Tags: , ,

2 responses to “Stratos2 Demo Setup Alpha – with Open Stack

  1. damitha23

    January 5, 2013 at 7:20 am

    Hi,
    Before starting the VM I suggest you do the following,

    “Select the virtual machine and click the Details tab on the right. Then click the Network panel. Under the Network click the Adaptor 2 tab. In the Attached To drop-down box select Host-only Adaptor. Under the Name drop-down box select the host only interface you created(as described by Dinuka) and click OK button”

    Otherwise it try to use the configured interface in the image and pop up a warning message box.

     

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s

 
Follow

Get every new post delivered to your Inbox.

%d bloggers like this: